The machine does not have the required protection, which can lead users to be unintentionally exposed to radiation and consequently suffer damage to their health.

The product does not comply with the requirements of the Machinery Directive nor with the European standards EN 60825-1 and EN 60825-4.

政府当局下令采取的措施：禁止销售该产品。

Measures ordered by public authorities:

Ban of the marketing of the product.

发布日期：10/04/2026

谷物脱粒机 Grain separator

通报国家Notifying country：法国 France

召回原因Risk type：割伤 Cuts

触电Electric shock

机器紧急停机装置不足，缺少控制装置标识。因此，运动部件可以在动作时被触及，从而割伤用户。此外，由于难以接近距离地面超过两米的控制面板，且存在无法识别的带电导体，且电气面板没有得到足够的保护，以防止因操作机器而产生的灰尘堆积，用户会因此误触带电部件，进而受到电击。

该产品不符合机械指令的要求。

The machine has insufficient emergency stop devices and lacks identification of the control devices. Therefore, moving parts can be accessed while they are moving, causing cuts to the user. In addition, owing to the difficulty in accessing the control panel located more than two meters from the ground, the user can touch live parts, while there are unidentified electrical conductors and the electric panel is insufficiently protected from the accumulation of dust generated by operating the machine. The user can therefore receive an electric shock.

The product does not comply with the requirements of the Machinery Directive.

政府当局下令采取的措施：禁止销售该产品并采取相应措施，从最终用户手中召回该产品。

Measures ordered by public authorities:

Ban on the marketing of the product and any accompanying measures, Recall of the product from end users

发布日期：17/04/2026

电动滑板车 Electric scooter

通报国家Notifying country：德国Germany

召回原因Risk type：灼伤 Burns

火灾 Fire

不能排除使用的电池可能过热，因此存在火灾风险。

该产品不符合机械指令的要求，也不符合欧洲标准EN 17128。

It cannot be ruled out that the batteries used could overheat and therefore be a fire risk.

The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 17128.

政府当局下令采取的措施：从最终用户手中召回该产品。

Measures ordered by public authorities:

Recall of the product from end users

发布日期：30/04/2026

冲击扳手 Impact wrench

通报国家Notifying country：北爱尔兰

United Kingdom in respect of Northern Ireland

召回原因Risk type：触电Electric shock

内部连接不当，这些连接可能松动导致产品带电。使用者可能接触到带电部件，这会导致触电。

该产品不符合机械指令的要求。

The internal connections are inadequate and these connections could loosen causing the product to become live. The user could touch accessible live parts, which may cause an electric shock.

The product does not comply with the requirements of the Machinery Directive.

政府当局下令采取的措施：货物进口在边境被拒。

Measures ordered by public authorities:

Import rejected at border.

立即咨询获取报价

警惕！10 款产品欧盟通报：镍、塑化剂、重金属严重超标，中国产品占多

美国FCC重塑设备认证版图：非互惠国实验室面临转型，中国出口企业合规挑战升级